
19
Section 4
Figure 4-5 Adjusting Cutting Height
Figure 4-4 Deck Release Lever
4.14 TOWING (optional hitch accessory)
1. Never allow children or others in or on towed
equipment.
2. Tow only with a machine that has a hitch designed
for towing. Do not attach towed equipment except at
the hitch point.
3. Follow manufacturer's recommendations for weight
limit for towed equipment. 250lbs. maximum towing
weight.
4. Never tow on slopes. The weight of the towed
equipment may cause loss of traction and loss of
control.
HEIGHT ADJUSTMENT
PEDAL
LANYARD
PIN
STC 2006 ACH
CUT
TING
HEIGHT
5
4 1/4
3 1/2
2 1/2
X
1 1/4
STC 2006 DRL
DECK RELEASE LEVER
5. Travel slowly and allow extra distance to stop.
6. Zero turning with a trailer attached, could cause
damage to the trailer or mower.
4.15 Adjusting the Steering Levers
1. Apply the parking brake, turn the machine off and
remove the ignition key. Position the seat to the
desired location.
2. While in the operator's position with out the engine
running, move both steering levers forward and
reverse to check for full function control and
comfort.
3. If adjustment of the steering levers is needed, use the
following instructions to adjust.
A. Loosen the tension knob on the lever assembly.
B. Rotate the steering lever forward or backward to
achieve the optimum operating position.
C. Tighten the tension knob and repeat on the
opposite side.
D. While in the operators position, bring the steering
levers out of the neutral lock position and check
to make sure both levers are even before
operating.
4. The control handle can also be adjusted in two
different positions. If necessary, remove the two
bolts securing the control handle to the control lever.
Install the handle in the desired position.
Figure 4-6 Adjusting Steering Levers
TENSION
KNOB
ROTATE
LEVER
Comentarios a estos manuales